PART |
Description |
Maker |
RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
FAN6921ML FAN6921MLMY |
Integrated Critical Mode PFC/Quasi-Resonant Current Mode PWM Controller
|
Fairchild Semiconductor
|
ICE3BS02L |
Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode
|
INFINEON[Infineon Technologies AG]
|
UPD23C16040BLGX UPD23C16040BLGY-MJH UPD23C16040BL |
16M-BIT MASK-PROGRAMMABLE ROM 2M-WORD BY 8-BIT (BYTE MODE) / 1M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE
|
NEC[NEC]
|
SI-8205NHD |
Surface-Mount, Current Mode Control, Synchronous Rectifier Step-down Switching Mode Regulator ICs
|
Sanken electric
|
ADP1883 |
Synchronous Current-Mode Buck Controller with Constant On-time, 0.8 V Reference Voltage, and Power Saving Mode
|
Analog Devices
|
NCP1249C |
High-Voltage Current-Mode PWM Controller Featuring Peak Power Excursion and Self-Relaxing Off Mode
|
ON Semiconductor
|
SC16C852LIET SC16C852LIB |
1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface
|
NXP Semiconductors
|
ICE3AS03LJG |
Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell ( Latched and frequency jitter Mode )
|
Infineon Technologies AG
|
MX25L12845EMI-10G MX25L12845EZNI-10G |
?Serial Peripheral Interface compatible - Mode 0 and Mode 3
|
Macronix International
|
SI-8050Y |
Current Mode Control Step-Switching Mode
|
Sanken electric
|
EF-0926-20 EF-0926-20S |
The 926 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss.
|
JMK Inc.
|